Product Description
Flap Tracks for Cessna Aircraft
Replace worn-out tracks to prevent dangerous and expensive binding problems!
FAA-PMA flap tracks feature many improvements over the original.
- Improved material
- 20% stronger
- 6 times fatigue strength
- Greater resistance to wear, "mushrooming" and stress cracking
- Precision machined for smooth rolling action
- No pre-drilled holes for a precise, clean installation
- Replace just the track, not the entire assembly
- Cessna only lists the rib assembly for most aircraft
- Eliminates the need to drill into the fuel tank area
- Alodined then epoxy primed per MIL-PRF-23377 for corrosion protection
- Cessna aircraft models 150 thru 210
| Part Number: | 035-MC0525001-2 | |||||||||||||||||||||||||||||||||||||||||||
| Approval Basis: | FAA-PMA Approved | |||||||||||||||||||||||||||||||||||||||||||
| Replaces: |
| |||||||||||||||||||||||||||||||||||||||||||
| Aircraft Eligibility: | Click HERE for aircraft eligibility chart | |||||||||||||||||||||||||||||||||||||||||||
| Typical Lead Time: | Stock | |||||||||||||||||||||||||||||||||||||||||||
| Notes: |
Notes:
Determine if a Cessna flap track is worn beyond wear limits with the Flap Track Wear Gauge
Cessna models 152, A152, F152, FA152 and 172RG aircraft may have various flap track rib assemblies installed. If flap track rib assembly part number 0523231-23 is currently installed, then part number MC0523231-14 must be used to replace the flap track. If flap track rib assembly part number 0525001-1, 0525001-1S or 2425001-1 is currently installed, then part number MC0525001-2 must be used to replace the flap track.
Flap track rib assembly 0523231-23 includes a 0.16 inch thick flap track with no lightening hole. Flap track rib assemblies 0525001-1, 0525001-1S and 2425001-1 include a 0.25 inch thick flap track with a 2.25 inches lightening hole located between the flap roller slots. |
