Engine Baffles, Cessna 152 1980 thru 82. Complete Set

Cessna C-152 (80~82) Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install.

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

​Engine:  Lycoming  O-235-L2C

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C1528082

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0455006-5, 0455007-1, 0455008-1, 0455012-1, 0455012-7, 0455012-10, 0455012-11, 0455013-14, 0455013-17, 0455013-19, 0455013-23, 0455013-171, 0455015-1, 0455015-2, 0455018-19, 055018-21, 0455018-22, 0455018-27, 0455021-1

Aircraft Eligibility:

Cessna 152 1980-1982 - C-152: S/N 15283592 thru 15285594 | A152: S/N 0879 thru 01014 | F152: S/N 01674 thru 01928 | FA152: S/N 0358 thru 0382

Finish:

Bare or Hammertone Gray powder Coating.

Notes: