Engine Baffles, Cessna 172 M (1974-76). Complete Set

Cessna C-172M (1974~76) Complete Engine Baffle Set

 These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Lycoming O-320-E2D

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C172M-7476

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0555204-5, 0555206-12, 0555211-7, 0555212-1, 0555213-5, 0555214-7, 0555215-4, 0555216-202, 0555217-1

Aircraft Eligibility:

Cessna 1974-1976 | C-172: S/N 17261899 thru 17267584 | F172: S/N F17201035 thru F17201514

Finish:

Bare or Hammertone Gray Powder Coating.

Notes: