Engine Baffles, Cessna 172 S (1998-04.5) Complete Set

Cessna C-172S (1998~04.5) Complete Engine Baffle Set

 These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Lycoming IO-360-L2A

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C172S-98045

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0509069-7, 0509069-11, 0509070-8, 0509071-1, 0509072-1, 0509073-7, 0555215-4PC, 0555250-13, 0555259-20, 0555324-19, 0555325-1

Aircraft Eligibility:

Cessna C-172S S/N 172S8001 thru 172S9770

Finish:

Hammertone Gray Powder Coating is standard with this kit..

Notes: