Engine Baffles, Cessna 180 (1956-81) 182 (1958 -73) Complete Set

Cessna 180 (56-81) / 182 (58-73) (both w/ Oil Cooler) Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Continental  O-470  -L, -R

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C180182-PKG

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0750117-31, 0750128-19, 0750128-20, 0750128-21, 0750128-22, 0750128-23, 0750128-76, 0750135-1, 0750135-3, 0750135-4, 0750148-1, 0750148-20, 0750152-2, 0750152-3, 0755002-3, 0755002-31, 0755002-90, 07550050-9, 07550050-10, 07550050-11, 07550052-1, 0755149-1, 0851700-96, 1250134-2

Aircraft Eligibility:

Cessna:
180 1956 - 81 S/N 32151 thru 53203
182 1958 - 73 S/N 34754 thru 18262465

Finish:

Bare or Hammertone Gray Powder Coating.

Notes: