Engine Baffles, Cessna 182 (1977-86) Complete Set

Cessna C-182 (77-86) Late (w/ Oil Cooler) Complete Engine Baffle Set

• These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Continental  O-470 -R, -S, -U  or  Lycoming  O-540-L3C5D

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C182-7786

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0750117-31, 0750135-1, 0750135-3, 0750135-4, 0750152-1, 0750152-2, 0755001-24, 0755001-30, 0755001-39, 0755004-2, 0755004-3, 0755004-6, 0755004-9, 0755005-9, 0755007-1, 07550009-1, 0755010-1, 0755011-1, 0755012-2, 0755040-1, 0755040-2, 0755040-3,  0755040-4, 0851700-96, 1250961-5, 1250961-6, 1250961-7.

Aircraft Eligibility:

Cessna: 182 1977 thru 86, S/N 18265176 thru 18268615

Finish:

Bare or Hammertone Gray Powder Coating.

Components: