Engine Baffles, Cessna 185 Complete Set

Cessna C-185 (w/ Oil Cooler) Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Continental  IO-470-F  or  Continental  IO-520-D

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C185-PKG

Approval Basis:

FAA-PMA Approved 

Replaces:

C185-BRBKPKGJ

Aircraft Eligibility:

Cessna:
185 S/N 185-0001 thru 185-0237
185A S/N 185-0238 thru 185-0512
185B S/N 185-0513 thru 185-0653
185C S/N 185-0654 thru 185-0776
185D S/N 185-0777 thru 185-0967
185E S/N 185-0968 thru 185-1149
A185E S/N 18501600 thru 18502090
A185E S/N 185-0968 thru 185-1599
A185F S/N 18502091 thru 18502310
A185F S/N 18502311 thru 18504448

Finish:

Bare or Hammertone Gray Powder Coating.

Components: