Engine Baffles, Cessna, 206 & 207 (1964-75) Complete Set

Cessna  C-206 (1964-75) (w/ Oil Cooler) Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About these baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Continental  IO-520-A  or   Continental  IO-520-F

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-C206-64715

Approval Basis:

FAA-PMA Approved 

Replaces:

Cessna Parts: 0700309, 0700309-2, 0700309-9, 0750117-31, 0750135-1, 0750135-3, 0750135-4, 0750152-2, 0750152-3, 0851700-96, 1250100-8, 1250100-12, 1250100-15, 1250100-18, 1250100-41, 1250105-1, 1250105-2, 1250134-2, 1250135-3, 1250137-1, 1250900-1, 1250900-9, 1250927-1, 1255000-1,  

Aircraft Eligibility:

Cessna: C-206 S/N: 206-0001 thru 206-0275, U-206 S/N: 206-0276 thru 206-01604

Finish:

Bare or Hammertone Gray Powder Coating.