Engine Baffles, Piper Arrow PA-28R-201 1977 & Up. Complete Set

Piper PA-28R-201 Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About our baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

• Engine: Lycoming IO-360-C1C6
  

• Advantages of Cowl Saver:

  • Reduces transfer of vibration to the engine cowl and airframe
  • Eliminates cowl erosion
  • Extends baffle seal life
  • Reduces expensive cowl and cowl fastener repairs
  • Reduces fatigue and cracking in baffles, cowl skins and firewall

Part Number:

035-PA28R201

Approval Basis:

FAA-PMA Approved 

Replaces:

Piper Parts: 63605-00, 67822-00, 67823-00, 67824-00, 67825-00, 67830-00, 67831-00, 99589-00, 99593-00, 99594-00, 99595-00, 99792-00

Aircraft Eligibility:

PA-28R-201 (1977 & Up)

Finish:

Bare or Hammertone Gray powder Coating.

Notes:

Some of these aircraft had a 4" flange on the LH side of the baffles, please note if your aircraft does or does not have a 4" flange on the LH side.