Engine Baffles. Piper PA-28-181 Archer III. Complete Set.

Piper PA-28-181 Archer III Complete Engine Baffle Set

These baffles are FAA/PMA approved, have the silicone seals attached, and arrive ready to install

About our baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Lycoming  O-360-A4M

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Baffles are available in bare aluminum or hammertone grey powder coating.

Part Number:

035-PA28181-3    

Approval Basis:

FAA-PMA Approved

Replaces:

Piper Parts: 63605-00, 85485-002, 85485-004, 85485-014, 85485-015, 85486-002, 85486-003, 85486-009, 85487-002, 85487-003

Aircraft Eligibility:

PA-28-181 S/N S/N 2843001 and up

Notes: