Engine Baffles Piper PA-28-236 Dakota. Complete Set

Piper PA-28-236 Complete Engine Baffle Set

About our baffles in general:

• Baffles are made of 6061-T6 aluminum with many improvements over the original baffling.
• Improvements include: stainless steel brackets where needed, hard rivet construction, half inch backing plates on seals, and an improved fit to increase engine cooling.
• All Airforms engine baffles are designed to replace the factory installations and are individually interchangeable.
• The baffle seals are fiberglass reinforced, high temperature silicone: black is standard. Orange or blue are available for an extra charge.
• We also sell seal kits if your metal baffle pieces are in good shape .

Note:

• If aftermarket components of differing dimensions have been installed, it is the installer's responsibility to adjust the baffles to fit. Components include: starters, alternators, exhaust, etc.
• Mounting hardware is not included (nuts, bolts, screws, washers, retaining springs, and Tinnerman clips).

Engine:  Lycoming  O-540-J3A5D

Advantages of Cowl Saver:

• Reduces transfer of vibration to the engine cowl and airframe
• Eliminates cowl erosion
• Extends baffle seal life
• Reduces expensive cowl and cowl fastener repairs
• Reduces fatigue and cracking in baffles, cowl skins and firewall

Baffles available in bare aluminum or hannertone grey powder coat.

Part Number:

035-PA28236

Approval Basis:

FAA-PMA Approved 

Replaces:

Piper Parts: 35926-06, 35932-02, 35945-02, 65030-07, 65097-02, 65098-02, 65099-03, 65100-02, 65101-02, 65102-03, 68054-04, 99577-02

Aircraft Eligibility:

PA-28-236 S/N 28-7911001 through 28-8611008; 2811001 through 2811050; and 2845001 and up

Notes: