Front Entry Door Seal, Piper PA-28, PA-32, PA-34 Models 1976 and Up. ADS-P301 -23

HIGH PERFORMANCE AIRCRAFT DOOR AND WINDOW SEALS

FAA-approved revolutionary new seal design!

Nearly a year of development and testing went into creating this revolutionary new sealing material. This new seal for General Aviation Aircraft is the result of a space age material developed for NASA. It is ideal for airplanes because it conforms to the sealing surfaces, forming a perfect sealing bond between the door and the fuselage. Custom extruded from a special hybrid rubber compound, the new seal is superior to any seal on the market.

The hybrid rubber compound sealing material is unique because it compresses under pressure from the door. When the door stops applying pressure against the seal, the seal no longer compresses and actually makes an impression of the surface pressing against it. This seal conforms to surfaces so well that when you open the door you will actually see a perfect imprint in the seal of every rivet and seam!

The seal has the ability to compress from its full thickness to as small as 1/32" thick without losing its sealing ability.  The hybrid compound meets Military Specifications (Mil Spec) and is now certified for use on single engine aircraft by the FAA, requiring only a log book entry. The seal is FAA-PMA APPROVED, Affordable, and Made in the USA. The new seals are available at a fraction of the cost of OEM seals and benefits of their use include an airtight and water tight fit, and greatly reduced cabin noise for even more enjoyable flying!

Adhesive Remover: One of the toughest parts of replacing your seals is removing the old adhesive, most adhesive removers simply aren't effective. We now carry Peerco 321 adhesive remover in a handy 1 pint container.  It will clean up the old adhesive in just a fraction of the time. Sold here

Adhesive: The best adhesive for seal installation is EC1300L or 3M 08001. Knots 2U carries adhesive in stock. Sold Here

Kit Number:

ADS-P301-23

Approval Basis:

FAA-PMA Approved. Part number ADS1200-301-23 (qty 1 ea)

Replaces:

Piper 78741-02, 189-139, 79545-017, 688-431, 19063-02

Aircraft Eligibility:

Piper Models
PA-28-140 S/N 28-7625030 and after
PA-28-150 S/N 28-7505261 and after
PA-28-160 S/N 28-7505261 and after
PA-28-180 S/N 28-7505261 and after
PA-28-235 S/N 28-7610021 and after
PA-28R-200 S/N 28R-7635018 and after
PA-28-151 S/N 28-7615002 and after
PA-28-161 
PA-28-181
PA-28-201T
PA-28-236
PA-28R-201, 201T, RT201, RT-201T
PA-32-260 S/N 32-7600002 and after
PA-32-300 S/N 32-7640030 and after
PA-32R-300
PA-32R-300T
PA-32RT-300
PA-32RT-300T
PA-32-301
PA-32-301T
PA-32R-301
PA-32R-301T
PA-34-200T
PA-34-220T

Typical Lead Time:

Stock

Finish:

N/A

Specifications:

N/A

Notes:

Kit contains a seal for one door and includes instructions and seal lube.