Main Landing Gear Door Hinge Upgrade, Bonanza Models. Both Doors

This kit covers the main gear door hinge bushings for the Beech Bonanza.

Avoid unnecessary and costly repairs by installing AeroTough® GF polymer bushings. This preventative maintenance solution will ensure that you will never have the complications with seized bushings that traditional metal bushings can exhibit.

Lifetime lubricated AeroTough® bushings prevent problems:

• Eliminate anxiety about damages to the supporting structure
• Never worry about lubricating tough-to-access place
• Zero risk of corrosion between sleeve and bushing
• Be proactive: The cost to repair greatly exceeds the price of prevention. Don’t wait for disasters to occur. Make the change now!
• An essential part of your landing gear maintenance checklist is the need for periodic lubrication of hard-to-get-at door hinge bushings. Achieving proper lubrication is challenging because access is difficult. If these bushings are not lubricated regularly, corrosion will result. This can cause the bushing and sleeve to fuse together over time, resulting in problems with the door rigging and the operation of the aircraft. This could lead to an inoperable gear door or the cracking of the gear door - a safety issue for sure and at best, an expensive repair. Our kit is insurance against the possibility of future problems.
• The solution to this problem is AeroTough® GF polymer bushings. These non-metallic bushings can be easily installed and will provide smooth grease-free operation. AeroTough® bushings will never require lubrication. The polymer material is designed to incorporate its own lubrication. If someone doesn’t know our bushings have been fitted and decides to squirt some lubrication into the hinges, it’s no problem. Our bushings are quite happy to run in oil or grease – it’s just not necessary!
• The Marsh Brothers Aviation Kit Includes not only the AeroTough® GF bushings, but all new hardware to re-install your landing gear doors.

INSTALLATION KIT SOLD HERE

Part Number:

126-M1000

Approval Basis:

United States STC SA03343NY
Transport Canada STC SA13-39

Aircraft Eligibility:

Textron Beechcraft
E33, E33A, E33C, F33, F33A, F33C, G33
35-33, 35-A33, 35-B33, 35-C33, 35-C33A, H35, J35, K35, M35, N35, P35, S35, V35, V35A, V35B.
36, A36, A36TC, B36TC,G36,

Typical Lead Time:

Stock

Notes:

Kit contains parts for two doors. (LH & RH)
Installation Kit 05-12241 is not required, but recommended.

Kit Contents

4 ea AN3-7A   Bolt
2 ea AN3-10A Bolt
2 ea AN3-16A Bolt
10 ea MBA100005 Aerotough GF Bushings
6 ea MBA10058S Short SS Sleave
2 ea MBA10058L Long SS Sleave
16 ea AN960-10A Washer
8 ea AN365-1032A Nut