Product Description
|
Knots 2U provides the highest quality aircraft windows and winshields in the world. These are not cheap reproductions, they are manufactured to only the highest standards by the same manufacturer that provides many of the OEMs. All of our parts are FAA-PMA approved and ship within a few days of ordering. Material is available in a variey of colors and thicknesses. SC-represents the new solar control material. UVA exposure will eventually damage your interior allowing it to fade and is the leading casue of skin cancer. UV radiation increases about 5% with every 1,000 ft of altituded. While the standard clear and grey will block virtually all of the UV rays it only blocks about 80% of the UVA. The SC product blocks all of the UV and 99% of the UVA which will help maintain your interior and prevent harmfull rays for you and your passengers. The SC- material also blocks near infrared radiation (NIR) which causes heat. You can reduce the NIR radiation (solar energy heat) by aproximately 30% with the SC- material!
|
|
|
Part Number: |
GLA1220 |
|
Approval Basis: |
FAA-PMA Approved |
|
Replaces: |
|
|
Aircraft Eligibility: |
172B, 172C, 172D, 172E, 172F, 172G, 172H, 172I, 172K, 172L, 172M, 172N, 172P (48182 THRU SN 17275759) F172D, F172E, F172F, F172G, F172H, F172K, F172L, F172M, F172N, F172P (F172-0001 THRU F17202194) |
|
Notes: |
NOTE: Because this window is thicker than the original part Using Rubber U-Channel will make it difficult to install. Install with Sealent only or 3M 471 Vinyl Tape or similar may be used to protect the edge during installation. The Vent hole may be located further back on the window if deired, Specify below the location in INCHES to the CENTER of the hole. For example "12 Inches" would indicate 12" back from the front edge to the CENTER of the hole. If the field is blank then the vent location will be as in the drawing below. If you have any questions contact us. |
